Van den Hul The MC-Silver

Van den Hul The MC-Silver mk II 0.8 m XLR.
Therefore the MC – SILVER IT Mk II Balanced was designed.
A rather uncommon design with a conductor configuration that is officially named: Tri-Axial.
For all the metals in the MC – SILVER IT Mk II Balanced, we use the world’s highest grade of Matched Crystal (MC) Oxygen Free Copper (OFC) with a very thick mechanically (thus non-chemically) applied purest silver layer.
This adds to the sonic qualities and prevents chemical deterioration, reducing any degeneration of the product.

The centre group, acting as signal-up is made of 19 strands very dense silver coated MC OFC with a diameter of 0.16 mm.
each. Over this centre group 2 layers of Teflon tape are applied.
Then the first braiding, acting as signal return made of 72 x 0.075 mm. very dense silver coated MC OFC strands, follows.
After this comes a second insulation layer with 4 sheets of Teflon.
The outer group functioning as shield is made of 2 layers.
First: a helically overlapping wound silver tape with dimensions 2.5 x 0.05 mm.
Second: a braiding of 216 strands made of 0.102 mm. very dense silver coated MC OFC.
The outer 7.0 mm. diameter jacket is made of HULLIFLEX ® EHD. This specific insulation material is too costly to be used in all our products.

In practice the sonic results are determined by the quality of the conductors. A lesser factor is the layout of the product.
With superb conductor material, 95 % of the transmission quality is determined. Frequency range is a matter of layout and insulator parameters.
Nevertheless, the frequency range of the MC – SILVER IT Mk II Balanced is 22 GHz. More than enough for a good analog system.

Van den Hul The MC-Silver mk II 0.8 m XLR.
Therefore the MC – SILVER IT Mk II Balanced was designed.
A rather uncommon design with a conductor configuration that is officially named: Tri-Axial.
For all the metals in the MC – SILVER IT Mk II Balanced, we use the world’s highest grade of Matched Crystal (MC) Oxygen Free Copper (OFC) with a very thick mechanically (thus non-chemically) applied purest silver layer.
This adds to the sonic qualities and prevents chemical deterioration, reducing any degeneration of the product.

The centre group, acting as signal-up is made of 19 strands very dense silver coated MC OFC with a diameter of 0.16 mm.
each. Over this centre group 2 layers of Teflon tape are applied.
Then the first braiding, acting as signal return made of 72 x 0.075 mm. very dense silver coated MC OFC strands, follows.
After this comes a second insulation layer with 4 sheets of Teflon.
The outer group functioning as shield is made of 2 layers.
First: a helically overlapping wound silver tape with dimensions 2.5 x 0.05 mm.
Second: a braiding of 216 strands made of 0.102 mm. very dense silver coated MC OFC.
The outer 7.0 mm. diameter jacket is made of HULLIFLEX ® EHD. This specific insulation material is too costly to be used in all our products.

In practice the sonic results are determined by the quality of the conductors. A lesser factor is the layout of the product.
With superb conductor material, 95 % of the transmission quality is determined. Frequency range is a matter of layout and insulator parameters.
Nevertheless, the frequency range of the MC – SILVER IT Mk II Balanced is 22 GHz. More than enough for a good analog system.

Van den Hul The MC-Silver

Molimo Vas ispunite osnovne kontakt podatke u nastavku kako bi na Vaš zahtjev dostavili ponudu o proizvodu i odgovorili na vaš upit

Zanima me proizvod: Van den Hul The MC-Silver