McIntosh MT2

CARTRIDGE SPECIFICATIONS

  • Cartridge Type
    Moving Coil, High Output
  • Output Level
    2.5 mV at 5 cm/s
  • Load Impedance
    1000 Ohms recommended (Preamp MC Input)
  • Frequency Response
    20Hz to 50kHz
  • Channel Separation
    35dB at 1kHz
  • Compliance
    15 x 10-6 cm/dyne
  • Recommended Tracking Force
    2.0 g
  • Channel Difference
    Less than 0.5dB at 1kHz
  • Total Mass
    6.3 g
  • Stylus
    Elliptical Diamond
  • Cantilever Material
    Aluminum

TONEARM SPECIFICATIONS

  • Bearing
    Sapphire and Ceramic
  • Arm Tube
    Dural-Aluminum
  • Counterweight
    Eccentric
  • Adjustments
    Vertical Tracking Angle, Antiskate, Azimuth

TURNTABLE SPECIFICATIONS

  • Playback Speeds
    33-1/3 and 45 rpm
  • Motor Type
    DC Motor with Stainless Steel Brushes
  • Speed Control
    Servo System
  • Platter
    Dynamically balanced polyoxymethylene (POM)
  • Platter Bearing
    Polished and tempered steel shaft in sintered bronze bushings
  • Signal To Noise Ratio
    35dB – 40dB
  • Wow & Flutter
    0.15% – 0.25%

CONNECTIVITY

  • Stereo Outputs Unbalanced
    1

CONTROL

  • Power Control Input
    0
  • Power Control Output
    0
  • Platter Light
    N/A
  • Speed Control Fine Adjustment
    Yes

GENERAL SPECIFICATIONS

  • Dust Cover Included
    Yes

WEIGHTS & DIMENSIONS

  • Dimensions (W x H x D)
    17-13/16″ (45.2cm) x 5″ (12.7cm) (6″ (15.2cm) with dust cover) x 17″ (43.2cm)
    Note: Tone Arm Height will vary depending on the type of Cartridge installed.
  • Weight
    29 lbs (13.2 kg)
  • Shipping Weight
    39 lbs (17.6 kg)

CARTRIDGE SPECIFICATIONS

  • Cartridge Type
    Moving Coil, High Output
  • Output Level
    2.5 mV at 5 cm/s
  • Load Impedance
    1000 Ohms recommended (Preamp MC Input)
  • Frequency Response
    20Hz to 50kHz
  • Channel Separation
    35dB at 1kHz
  • Compliance
    15 x 10-6 cm/dyne
  • Recommended Tracking Force
    2.0 g
  • Channel Difference
    Less than 0.5dB at 1kHz
  • Total Mass
    6.3 g
  • Stylus
    Elliptical Diamond
  • Cantilever Material
    Aluminum

TONEARM SPECIFICATIONS

  • Bearing
    Sapphire and Ceramic
  • Arm Tube
    Dural-Aluminum
  • Counterweight
    Eccentric
  • Adjustments
    Vertical Tracking Angle, Antiskate, Azimuth

TURNTABLE SPECIFICATIONS

  • Playback Speeds
    33-1/3 and 45 rpm
  • Motor Type
    DC Motor with Stainless Steel Brushes
  • Speed Control
    Servo System
  • Platter
    Dynamically balanced polyoxymethylene (POM)
  • Platter Bearing
    Polished and tempered steel shaft in sintered bronze bushings
  • Signal To Noise Ratio
    35dB – 40dB
  • Wow & Flutter
    0.15% – 0.25%

CONNECTIVITY

  • Stereo Outputs Unbalanced
    1

CONTROL

  • Power Control Input
    0
  • Power Control Output
    0
  • Platter Light
    N/A
  • Speed Control Fine Adjustment
    Yes

GENERAL SPECIFICATIONS

  • Dust Cover Included
    Yes

WEIGHTS & DIMENSIONS

  • Dimensions (W x H x D)
    17-13/16″ (45.2cm) x 5″ (12.7cm) (6″ (15.2cm) with dust cover) x 17″ (43.2cm)
    Note: Tone Arm Height will vary depending on the type of Cartridge installed.
  • Weight
    29 lbs (13.2 kg)
  • Shipping Weight
    39 lbs (17.6 kg)

McIntosh MT2

Molimo Vas ispunite osnovne kontakt podatke u nastavku kako bi na Vaš zahtjev dostavili ponudu o proizvodu i odgovorili na vaš upit

Zanima me proizvod: McIntosh MT2