Halcro DM 38

Halcro dm 38 Stereo Power Amplifier

Specifications:
Power output into 4ohms resistive > 350W:
Power output into 8ohms resistive > 180W.
DISTORTION (Footnote 1).At full power output, all harmonic distortion ordersTHD <-110dB (<3000 parts per billion) up to 20kHz(100kHz B.W.) at 350W into 4 ohms.THD @ 1kHz <-130dB (<300 parts per billion).For sum of 19 and 20kHz tones, each delivering 100Winto 4 ohms = peak power 350W, intermodulationproducts each <-110dB relative to output.SMPTE-IM intermodulation products each<-110dB relative to output.
INPUTS:
There are 3 input modes:An unbalanced voltage mode input with animpedance of 10kohmA balanced voltage mode input with an impedanceof 10kohms + 10kohmsA current-mode input with a 60ohm inputimpedance to minimize cable reflections (to be fedfrom an infinite impedance current source)Voltage gain of the balanced and unbalancedinputs is 30V/VThe gain of the current mode is 5V/m.
ANOISE The equivalent input noise at the input is 5nV/sqrt(Hz)for the voltage modes and 6pA/sqrt(Hz) for the currentmode.SLEW RATE LIMIT:POWER SUPPLY (Footnote 2).Active power factor correction minimizes mainscurrent harmonic distortion110V model operates from 100-120V RMS, 45-65Hz,240V model operates from 220-240V RMS, 45-65Hz.Less than 100 parts per million mains hum andripple on the amplifier power rails.
Conforms with all current emission and safetystandards.
OVERLOAD (Footnote 3).Recovery from hard overload at 20kHz into 4ohms:1 s.
DIMENSIONS:
Height, 31 inches or 79 cm Width, 16 inches or 40 cm Depth, 16 inches or 40 cm Weight, 120 lbs. or 55 kg.
Shipping weight, 187 lbs. or 85 kg

Halcro dm 38 Stereo Power Amplifier

Specifications:
Power output into 4ohms resistive > 350W:
Power output into 8ohms resistive > 180W.
DISTORTION (Footnote 1).At full power output, all harmonic distortion ordersTHD <-110dB (<3000 parts per billion) up to 20kHz(100kHz B.W.) at 350W into 4 ohms.THD @ 1kHz <-130dB (<300 parts per billion).For sum of 19 and 20kHz tones, each delivering 100Winto 4 ohms = peak power 350W, intermodulationproducts each <-110dB relative to output.SMPTE-IM intermodulation products each<-110dB relative to output.
INPUTS:
There are 3 input modes:An unbalanced voltage mode input with animpedance of 10kohmA balanced voltage mode input with an impedanceof 10kohms + 10kohmsA current-mode input with a 60ohm inputimpedance to minimize cable reflections (to be fedfrom an infinite impedance current source)Voltage gain of the balanced and unbalancedinputs is 30V/VThe gain of the current mode is 5V/m.
ANOISE The equivalent input noise at the input is 5nV/sqrt(Hz)for the voltage modes and 6pA/sqrt(Hz) for the currentmode.SLEW RATE LIMIT:POWER SUPPLY (Footnote 2).Active power factor correction minimizes mainscurrent harmonic distortion110V model operates from 100-120V RMS, 45-65Hz,240V model operates from 220-240V RMS, 45-65Hz.Less than 100 parts per million mains hum andripple on the amplifier power rails.
Conforms with all current emission and safetystandards.
OVERLOAD (Footnote 3).Recovery from hard overload at 20kHz into 4ohms:1 s.
DIMENSIONS:
Height, 31 inches or 79 cm Width, 16 inches or 40 cm Depth, 16 inches or 40 cm Weight, 120 lbs. or 55 kg.
Shipping weight, 187 lbs. or 85 kg

Halcro DM 38

Molimo Vas ispunite osnovne kontakt podatke u nastavku kako bi na Vaš zahtjev dostavili ponudu o proizvodu i odgovorili na vaš upit

Zanima me proizvod: Halcro DM 38