Classe CAP-2100

Specifications:

„ Power output (both channels driven) 100W/ch continuous rms @ 8Ω
200W/ch continuous rms @ 4Ω
„ Frequency response 10Hz – 22kHz (+0/-0.1dB)
10Hz – 155kHz (+0/-3.0dB)
„ Phase less than -10° @ 22kHz
„ Signal-to-noise ratio 95dB typical
„ Channel separation better than 95dB @ 20kHz
„ Noise floor (FFT) all peaks less than -90dBV
(10Hz – 80kHz)
„ Distortion (THD + noise) 0.005% @ 8Ω
(unweighted, 0.8Vrms/1kHz input, 10Hz – 80kHz)
„ Maximum input voltage 3.8Vrms (single-ended)
7.8Vrms (balanced)
„ Voltage gain range -100dB to +14dB
„ Sensitivity (SSP input) 0.5Vrms for rated output (single-ended)
1.0Vrms for rated output (balanced)
„ Input Impedance 100kΩ
„ Output Impedance (main output) 100Ω
„ Input complement 1 balanced (XLR), 4 single-ended (RCA)
„ Output complement 2 single-ended (RCA)
„ Crosstalk (any input to any output) better than -95dB
„ Rated power consumption (as per IEC60065 – para.2.3.10) 260W
„ Idle power consumption 125W
„ Mains voltage specifi ed on rear panel decal
(cannot be changed by user or dealer)
„ Dimensions (not incl. controls or connectors) Width: 17.5” (445mm)
Height: 4.75” (121mm)
Depth: 16.5” (419mm)
„ Shipping weight :27 kg
„ Net weight : 23 kg

Specifications:

„ Power output (both channels driven) 100W/ch continuous rms @ 8Ω
200W/ch continuous rms @ 4Ω
„ Frequency response 10Hz – 22kHz (+0/-0.1dB)
10Hz – 155kHz (+0/-3.0dB)
„ Phase less than -10° @ 22kHz
„ Signal-to-noise ratio 95dB typical
„ Channel separation better than 95dB @ 20kHz
„ Noise floor (FFT) all peaks less than -90dBV
(10Hz – 80kHz)
„ Distortion (THD + noise) 0.005% @ 8Ω
(unweighted, 0.8Vrms/1kHz input, 10Hz – 80kHz)
„ Maximum input voltage 3.8Vrms (single-ended)
7.8Vrms (balanced)
„ Voltage gain range -100dB to +14dB
„ Sensitivity (SSP input) 0.5Vrms for rated output (single-ended)
1.0Vrms for rated output (balanced)
„ Input Impedance 100kΩ
„ Output Impedance (main output) 100Ω
„ Input complement 1 balanced (XLR), 4 single-ended (RCA)
„ Output complement 2 single-ended (RCA)
„ Crosstalk (any input to any output) better than -95dB
„ Rated power consumption (as per IEC60065 – para.2.3.10) 260W
„ Idle power consumption 125W
„ Mains voltage specifi ed on rear panel decal
(cannot be changed by user or dealer)
„ Dimensions (not incl. controls or connectors) Width: 17.5” (445mm)
Height: 4.75” (121mm)
Depth: 16.5” (419mm)
„ Shipping weight :27 kg
„ Net weight : 23 kg

Classe CAP-2100

CLASSE CAP-2100

Molimo Vas ispunite osnovne kontakt podatke u nastavku kako bi na Vaš zahtjev dostavili ponudu o proizvodu i odgovorili na vaš upit

Zanima me proizvod: Classe CAP-2100