Audio Research Reference Phono 2 SE

SPECIFICATIONS :

Frequency Response: ± .2dB of RIAA, 10Hz to 60kHz; 3dB points below 0.3Hz and above 300kHz.
Distortion: Less than .002% at 1.0V RMS 1kHz output.
Gain:
Selectable 51dB (Low), 74dB (High) at1kHz BAL; 45dB (Low), 68dB (High) at1kHz SE. (MC & MM compatible).
Buttons: Front (6) Power, Input, Gain, Load, RIAA, Mute. Remote adds ‘Hours’ and ‘Display’.
Input Impedance: 47K ohms and 100pF SE.
Selectable loads: 1000, 500, 200, 100, 50 ohms and Custom.
Phono Equalization: (Selectable) RIAA, Columbia, Decca.
Polarity: Non-Inverting.
Output Impedance: 200 ohms SE, 400 ohms balanced. Recommended load 50K-100K ohms and 100pF. (10K ohms
minimum and 2000pF maximum.)
Maximum Input: 250mV RMS at 1kHz (680 mV RMS at10kHz).
Rated Outputs: 0.5V RMS 10Hz to 20kHz, 100K ohm load (output capability is 80V RMS BAL output at 1/2% THD
at1kHz, 40V SE.)
Power Supplies:
Electronically-regulated low and high voltage supplies. Line regulation better than .01%.
Noise: 0.22uV equivalent input noise, IHF weighted, shorted(Low Gain) input (73 dB below 1mV 1kHz input). 0.055uV
equivalent input noise (High Gain) (65dB below 0.1mV 1kHz input).
Tube Complement: (4) 6H30 dual triodes, plus (1 each) 6H30, 6550C in power supply.
Power Requirements: 100-135VAC 60Hz (200-270VAC50/60Hz) 140 watts maximum. 2W standby. Line fuse 5A SLO
BLO (T2A SLO BLO 230V).
Dimensions:
Width: 48 cm
Height: 17.8 cm standard rack panel
Depth: 39.4 cm.
Handles extend : 3.8 cm forward of front panel.
Weight:
12.3 kg Net;
17.3 kg Shipping.

SPECIFICATIONS :

Frequency Response: ± .2dB of RIAA, 10Hz to 60kHz; 3dB points below 0.3Hz and above 300kHz.
Distortion: Less than .002% at 1.0V RMS 1kHz output.
Gain:
Selectable 51dB (Low), 74dB (High) at1kHz BAL; 45dB (Low), 68dB (High) at1kHz SE. (MC & MM compatible).
Buttons: Front (6) Power, Input, Gain, Load, RIAA, Mute. Remote adds ‘Hours’ and ‘Display’.
Input Impedance: 47K ohms and 100pF SE.
Selectable loads: 1000, 500, 200, 100, 50 ohms and Custom.
Phono Equalization: (Selectable) RIAA, Columbia, Decca.
Polarity: Non-Inverting.
Output Impedance: 200 ohms SE, 400 ohms balanced. Recommended load 50K-100K ohms and 100pF. (10K ohms
minimum and 2000pF maximum.)
Maximum Input: 250mV RMS at 1kHz (680 mV RMS at10kHz).
Rated Outputs: 0.5V RMS 10Hz to 20kHz, 100K ohm load (output capability is 80V RMS BAL output at 1/2% THD
at1kHz, 40V SE.)
Power Supplies:
Electronically-regulated low and high voltage supplies. Line regulation better than .01%.
Noise: 0.22uV equivalent input noise, IHF weighted, shorted(Low Gain) input (73 dB below 1mV 1kHz input). 0.055uV
equivalent input noise (High Gain) (65dB below 0.1mV 1kHz input).
Tube Complement: (4) 6H30 dual triodes, plus (1 each) 6H30, 6550C in power supply.
Power Requirements: 100-135VAC 60Hz (200-270VAC50/60Hz) 140 watts maximum. 2W standby. Line fuse 5A SLO
BLO (T2A SLO BLO 230V).
Dimensions:
Width: 48 cm
Height: 17.8 cm standard rack panel
Depth: 39.4 cm.
Handles extend : 3.8 cm forward of front panel.
Weight:
12.3 kg Net;
17.3 kg Shipping.

Audio Research Reference Phono 2 SE

Audio Research Phono Ref 2 SE

Molimo Vas ispunite osnovne kontakt podatke u nastavku kako bi na Vaš zahtjev dostavili ponudu o proizvodu i odgovorili na vaš upit

Zanima me proizvod: Audio Research Reference Phono 2 SE