Audio Research REF 10 Phono

Audio Research REFERENCE 10 Phono-Stage

Electronic Specifications

FREQUENCY RESPONSE :

± .2dB of RIAA, 10Hz to 60kHz; 3dB points below 0.3Hz and above 300kHz.

DISTORTION 

Less than .002% at 1.0V RMS 1kHz output.

GAIN

Selectable 51dB (Low), 74dB (High) at1kHz BAL; 45dB (Low), 68dB (High) at1kHz SE. (MC & MM compatible).

BUTTONS 

Front (2) Power, Mute.

INPUT IMPEDANCE 

47K ohms and 100pF SE. Selectable loads 1000, 500, 200, 100, 50 ohms and Custom.

PHONO EQUALIZATION

(Selectable) RIAA, Columbia, Decca.

OUTPUT POLARITY Non inverting.

OUTPUT IMPEDANCE 

200 ohms SE, 400 ohms balanced. Recommended load 50K-100K ohms and 100pF. (10K ohms minimum and 2000pF maximum).

MAXIMUM INPUT 

250mV RMS at 1kHz (680 mV RMS at10kHz).

RATED OUTPUTS 

0.5V RMS 10Hz to 20kHz, 100K ohm load (output capability is 80V RMS BAL output at 1/2% THD at1kHz, 40V SE).

POWER SUPPLIES

Electronically regulated low and high voltage supplies. Automatic 40 sec. warm-up/brown-out mute. Line regulation better than .01%.

NOISE

0.22uV equivalent input noise, IHF weighted, shorted(Low Gain) input (73 dB below 1mV 1kHz input). 0.055uV equivalent input noise (High Gain) (65dB below 0.1mV 1kHz input).

TUBE COMPLEMENT 

(8)-6H30P dual triodes, plus (2 each) 6550C and 6H30P in power supply.

POWER REQUIREMENTS

100-135VAC 60Hz (200-270VAC 50/60Hz) 235 watts maximum. Standby 0.8 watts.

DIMENSIONS 

Width 19” (48 cm); Height 7” (17.8 cm) (standard rack panel)

Audio Research REFERENCE 10 Phono-Stage

Electronic Specifications

FREQUENCY RESPONSE :

± .2dB of RIAA, 10Hz to 60kHz; 3dB points below 0.3Hz and above 300kHz.

DISTORTION 

Less than .002% at 1.0V RMS 1kHz output.

GAIN

Selectable 51dB (Low), 74dB (High) at1kHz BAL; 45dB (Low), 68dB (High) at1kHz SE. (MC & MM compatible).

BUTTONS 

Front (2) Power, Mute.

INPUT IMPEDANCE 

47K ohms and 100pF SE. Selectable loads 1000, 500, 200, 100, 50 ohms and Custom.

PHONO EQUALIZATION

(Selectable) RIAA, Columbia, Decca.

OUTPUT POLARITY Non inverting.

OUTPUT IMPEDANCE 

200 ohms SE, 400 ohms balanced. Recommended load 50K-100K ohms and 100pF. (10K ohms minimum and 2000pF maximum).

MAXIMUM INPUT 

250mV RMS at 1kHz (680 mV RMS at10kHz).

RATED OUTPUTS 

0.5V RMS 10Hz to 20kHz, 100K ohm load (output capability is 80V RMS BAL output at 1/2% THD at1kHz, 40V SE).

POWER SUPPLIES

Electronically regulated low and high voltage supplies. Automatic 40 sec. warm-up/brown-out mute. Line regulation better than .01%.

NOISE

0.22uV equivalent input noise, IHF weighted, shorted(Low Gain) input (73 dB below 1mV 1kHz input). 0.055uV equivalent input noise (High Gain) (65dB below 0.1mV 1kHz input).

TUBE COMPLEMENT 

(8)-6H30P dual triodes, plus (2 each) 6550C and 6H30P in power supply.

POWER REQUIREMENTS

100-135VAC 60Hz (200-270VAC 50/60Hz) 235 watts maximum. Standby 0.8 watts.

DIMENSIONS 

Width 19” (48 cm); Height 7” (17.8 cm) (standard rack panel)

Audio Research REF 10 Phono

Phono REF10

Molimo Vas ispunite osnovne kontakt podatke u nastavku kako bi na Vaš zahtjev dostavili ponudu o proizvodu i odgovorili na vaš upit

Zanima me proizvod: Audio Research REF 10 Phono